What are the main types of federal contracts?
There are two main families. In a fixed-price contract, you get the agreed price even if the work costs you more, so you carry the risk. In cost-reimbursement, time-and-materials and labor-hour contracts, the government pays for what the work actually takes, up to a limit, so it carries more of the risk.
Two contracts can ask for the same work and still be very different deals. What changes is the contract type: the rule for how you get paid. It decides what happens if a job takes twice as long as you planned. It also decides how much bookkeeping the government expects from you. Most small businesses see fixed-price work first. Since April 2026, agencies have been told to make fixed price the default.
Who pays when the work costs more
| Firm fixed price | Time and materials | Cost reimbursement | |
|---|---|---|---|
| If costs run over | You pay | The government pays, up to the ceiling | The government pays, up to the estimate |
| Your paperwork | Lightest | Timesheets and receipts | An accounting system that tracks costs by contract |
| Price limit | The agreed price | Ceiling price | Estimated cost |
| Where you’ll see it | Supplies, commercial services, construction | Repairs, IT support, consulting | Research |
What most small businesses see first. Since April 30, 2026, agencies must justify any type other than fixed price (Executive Order 14402).
Sources: FAR 16.202-1, Firm-fixed-price contracts · FAR 16.601, Time-and-materials contracts · FAR 16.301-3, Cost-reimbursement contracts · Executive Order 14402, Promoting Efficiency, Accountability, and Performance in Federal Contracting (April 30, 2026). Checked Oct 27, 2026. The solicitation decides the details.
The three types you’ll see most
| Firm fixed price | Time and materials (or labor hour) | Cost reimbursement | |
|---|---|---|---|
| How you’re paid | One agreed price for the job, or a price per unit | Set hourly rates for hours worked, plus materials at cost | Your allowed costs, plus a fee |
| If the work costs more than planned | You pay the difference | The government pays, up to the ceiling price | The government pays, up to the estimated cost, unless it agrees to more |
| Your paperwork | Lightest | Timesheets and receipts for every hour and item you bill | An accounting system that tracks costs by contract |
| Where you’ll see it | Most small buys, supplies, commercial services, construction | Repairs, IT support or consulting when no one knows how long the work will take | Research and other work no one can price ahead of time |
Fixed price: you carry the risk
The Federal Acquisition Regulation (FAR) is the set of rules for how agencies buy. It says a firm-fixed-price contract puts the most risk on the contractor. The price doesn’t change because of what the work really cost you (FAR 16.202-1). If you finish under budget, you keep the savings. If you run over, the loss is yours.
So your price has to cover everything: labor, materials, travel, insurance, overhead and profit. It also has to cover what could go wrong. Read the statement of work closely before you price it. Giving a firm price for a vague task is an easy way to lose money.
There are a few versions. A fixed price with economic price adjustment can move with something you can’t control, like a published fuel or steel index. Some fixed-price contracts add a bonus for good work. The basic idea stays the same: you agree on the price before the work starts.
Time and materials: paid by the hour, up to a limit
In a time-and-materials contract, the government pays a fixed rate for each hour worked. It also pays the real cost of materials (FAR 16.601). A labor-hour contract works the same way, but without materials (FAR 16.602).
Two things surprise new contractors:
- The hourly rate has to include everything. The FAR says each rate includes wages, overhead, general and administrative costs, and profit. You can’t bill those on their own later. How to build your hourly rate walks through it.
- There is a ceiling price. The contract sets a maximum. If you go past it, you do so at your own risk (FAR 16.601). Only the contracting officer can raise the ceiling, in writing. Track your hours against it every week.
Agencies may use time and materials only when they can’t guess how long the work will take. The contracting officer must put in writing why no other type will work.
Cost reimbursement: you need the books first
In a cost-reimbursement contract, the government pays your allowed costs and a fee. It sounds safe, but it’s hard to qualify for. The FAR allows it only if your accounting system can track and separate costs for each contract (FAR 16.301-3). Most new small businesses don’t have that system yet. Agencies also can’t use cost reimbursement to buy commercial products or services.
If you’ve never had a federal contract, you’re more likely to see cost reimbursement as a subcontractor. The prime may then ask you for cost data and timesheets that fit its own system.
Why you’ll see even more fixed price now
On April 30, 2026, Executive Order 14402 told agencies to use fixed-price contracts “to the maximum extent consistent with law.” Any other type now needs a written reason from the contracting officer to the agency head. Above certain sizes, the agency head (or someone they pick) must approve it in writing.
| Agency | Approval needed above |
|---|---|
| Defense Department | $100 million |
| NASA | $35 million |
| Department of Homeland Security | $25 million |
| Every other agency | $10 million |
These approval limits don’t apply to emergency and disaster work or to some research. The FAR overhaul’s Part 16, which agencies use now, adds the same rules. A proposed rule to make that text permanent closed for comments on October 19, 2026. The final wording could still change.
For small businesses, this mostly means more fixed-price solicitations. That includes services that used to be time and materials. Your pricing has to be tighter, because there’s less room to bill for extra hours.
How to find the contract type in a solicitation
- Section B (supplies or services and prices) usually shows it in the line items, like “FFP” (firm fixed price) or “T&M” (time and materials).
- The cover form often has a box for it. That’s Standard Form (SF) 1449 for commercial buys and SF 33 for others.
- Section L may say what type the agency plans to award.
- Clauses in Section I give it away too. For example, FAR 52.232-7 is the payment clause for time-and-materials and labor-hour contracts.
One contract can mix types. A cleaning contract might be fixed price for routine work and time and materials for emergency calls.
Before you price
Contract type check
0 of 5 checked
In FedPath, save the solicitation to your pipeline. Then use the compliance matrix to list each requirement next to its contract type. The bid/no-bid tool helps you weigh whether the risk is worth it.
Key terms
- Contract type
- The payment setup in a contract. It decides how you get paid and who pays if costs go up.
- Firm fixed price
- One set price for the work. It doesn’t change if your costs do.
- Time and materials
- The government pays set hourly rates for hours worked, plus the real cost of materials, up to a ceiling price.
- Labor hour
- Like time and materials, but with no materials.
- Cost reimbursement
- The government pays your allowed costs, plus a fee, up to an estimated amount.
- Ceiling price
- The most the government will pay. Go past it and you work at your own risk.
Do this in FedPath
Weigh the risk before you bid. Use the bid/no-bid tool to score an opportunity, including how much price risk the contract type puts on you.
Free. FedPath is independent. It is not affiliated with, endorsed by, or part of the U.S. government, the Small Business Administration (SBA), SAM.gov, or any federal agency.
Common questions
Which contract type is best for a small business?
Firm fixed price is the simplest to manage, and it’s the type you’ll see most. It rewards you if you know your costs well. If the work is unclear, ask questions or add room for risk in your price.
Can I ask the agency to change the contract type?
You can ask during the question period, and some agencies listen. But the agency decides, and it now needs a written reason to use anything other than fixed price.
What happens if I hit the ceiling on a time-and-materials contract?
The government doesn’t have to pay for hours past the ceiling. Tell the contracting officer early. Only they can raise the ceiling, and only in writing.
Do I need a special accounting system for fixed-price work?
No. FAR 16.301-3 requires one for cost-reimbursement contracts. For fixed price and time and materials, keep good records of your hours and costs.