How do I decide whether to bid on a government contract?
Make a short, written bid/no-bid (Go/No-Go) decision before you write anything. Compare the opportunity with your business on the industry code, the set-aside, your skills and past work, any requirement you can’t meet, and the time left, and rate each one Strong, Acceptable, Concern or Unknown. Go ahead only when the concerns are ones you can solve.
A proposal can take days. So decide early, and on purpose, whether an opportunity deserves that time. This is called a bid/no-bid, or Go/No-Go, decision. Use the checklist below on a real opportunity. Then read how to make the call.
Go/No-Go: is this contract worth pursuing?
Hypothetical: a landscaping company looks at a grounds maintenance contract.
| Question | Answer |
|---|---|
| Does the work match what we do? | Yes Mowing and planting, like our current jobs. |
| Can we compete (set-aside, size, registration)? | Yes Small business set-aside; we’re small. |
| Can we meet every must-have? | Not sure A pesticide license is required. Ours may not cover this state. |
| Do we have time to write a good response? | Yes Due in three weeks. |
| Is it worth the effort and the risk? | Yes Three-year contract near our base. |
- Go Yes across the board
- Need more information One unknown that matters
- No-Go A blocker, or mostly no
This example: Need more information: confirm the license, then decide.
Sources: Federal contracting guide. Checked Oct 11, 2026. The solicitation decides the details.
The bid/no-bid checklist
Answer Yes, No or Not sure. Your answers stay in this browser and aren’t sent anywhere. “Not sure” is an honest answer: it tells you what to look up.
Answered 0 of 14
What your answers show
Not enough information yet
Too many key questions are still “Not sure” to judge this opportunity. Find those answers in the notice and the solicitation first. That isn’t a no: it’s what to look up next.
14 questions aren’t answered yet.
Check every answer against the full solicitation, its attachments and amendments on SAM.gov. This doesn’t confirm eligibility or predict an award.
Why decide at all
Without a decision, opportunities drift. Someone starts reading, the deadline gets closer, and a weak proposal goes out because work already started. A Go/No-Go is a short, written review, often under an hour. It ends with go, don’t go, or decide later by a set date.
How to decide whether to bid, step by step
Step 1: Find an opportunity
Start from a search or a match that looks close to your work.
Example: A cleaning company finds a custodial contract at a nearby federal building.
Avoid: Saving everything that mentions your keyword.
Then: Open the notice.
Step 2: Check whether your company qualifies
Look at the set-aside, the NAICS code and your SAM.gov registration.
Example: It’s a total small business set-aside, and the company is small under the code.
Avoid: Treating “not sure” as “no”. Check it instead.
Step 3: Review the work requirements
Read what the work is, where, how much and for how long.
Example: Two buildings, five nights a week, for one year plus options.
Avoid: Skipping the attachments, where most requirements live.
Step 4: Compare your experience
Match the work against similar jobs you’ve done, commercial ones included.
Example: It cleans three office buildings of similar size for private customers.
Then: Check how the solicitation evaluates past performance.
Step 5: Estimate the cost of preparing a proposal
Count the hours to read, write, price and review, and who will do them.
Example: About 40 hours from the owner and office manager.
Avoid: Forgetting your own time is a cost.
Step 6: Make your decision
Pursue, investigate one open question, or pass. Write down why.
Example: Pursue. The one open question, a site visit, goes on the calendar.
Then: If you pursue, build the compliance matrix next.
Start with opportunity analysis
First look closely, then decide. Lay the notice next to what you know about your business. Does the industry code match your work? Can you compete under the set-aside? Does the description use words from your capabilities? Is there anything you can’t meet, such as a clearance, license, bonding or on-site staffing? How many days are left?
This app’s Fit Analysis makes that comparison with fixed rules you can see. It compares the notice with your company profile. It lists the matches, potential gaps, potential blockers and what needs a closer look. Each is marked known, inferred or unknown. Each shows the reason and the words from the notice behind it. Missing company facts show as “we don’t know yet”, never as a mismatch. It helps you decide, and it doesn’t decide for you. How to evaluate an opportunity covers the comparison step by step.
The factors to rate
| Group | Questions |
|---|---|
| Opportunity fit | Do we do this work? Can we compete under the set-aside? Do we have relevant past performance? |
| Competitive position | Do we know the agency? Is there a strong incumbent? Do we need a teaming partner? |
| Delivery readiness | Do we have the people, clearances, locations and any required contract vehicle? |
| Economics and timing | Is there time to write a competitive proposal? Can we fund it and meet insurance and bonding? Is it worth it? |
Rate each factor Strong, Acceptable, Concern or Unknown. “Unknown” is an honest answer. It tells you what to find out. Too many unknowns close to the deadline is a reason to pass.
Check how the winner will be picked, too. When the lowest acceptable price wins, the lowest-cost bidder has the edge. When the agency weighs price against quality, the strongest plan does. See lowest price or best value.
Red flags
- A set-aside for a certification you don’t hold, with no teaming partner who does.
- A requirement you can’t meet in time: a facility clearance, a license, a bond.
- Too few working days to write a proposal you would be proud of.
- A notice that seems written around the current holder’s exact way of working, when you don’t know the buyer.
- Past work you’re asked for and can’t show, even through subcontracts.
To rate your chances with facts, see incumbent analysis before an RFP. It shows how to tell a known current holder from a guess.
Making the call
Write the decision and the reason down. When you look back, your no-bids tell you as much as your wins about where to focus.
Registered, eligible and qualified are three different things
- Registered: your business has an active SAM.gov registration. Most awards require it. But it doesn’t make you eligible for any one contract.
- Eligible for the set-aside: you meet “who can compete” on this notice. That may mean being small under its industry code. Or it may mean holding the Small Business Administration (SBA) certification that a HUBZone, 8(a), women-owned (WOSB) or service-disabled veteran-owned (SDVOSB) set-aside needs.
- Qualified under the solicitation: you meet its own rules. Those might be a license, insurance, a clearance, or a set amount of similar work.
You need all three. Check them in that order. If one fails, the rest of the checklist doesn’t matter for this contract. See self-certified or SBA-certified? for how set-aside status is confirmed.
Worked example: a small janitorial company
The answer isn’t yes or no yet. Nothing rules the company out, but three unknowns could. A day spent checking them costs less than a week on a proposal for work it can’t do. See read the wage determination before you price.
Key terms
- Go/No-Go decision
- A clear decision to go after a contract opportunity (go) or not (no-go). You make it before you put time into a proposal.
- Bid/no-bid
- Another name for the Go/No-Go decision.
- Incumbent
- The company doing the contract now. It often has an edge when the contract is bid again.
See it in the app
Understand the opportunity before spending hours reading and pursuing it. Sample data, real screens.
Step 1 of 4
See the key facts. The facts that decide whether to keep reading come first: stage, deadline, who can compete, industry and place.
Do this in FedPath
See how an opportunity fits your business. Open any opportunity, answer a few questions, and see a fit analysis in seconds. Saving it and running a Go/No-Go assessment come with a free account: [request free beta access](/account/signup/) for an invitation.
Explore opportunitiesRequest free beta access
Free. FedPath is independent. It is not affiliated with, endorsed by, or part of the U.S. government, the Small Business Administration (SBA), SAM.gov, or any federal agency.
Common questions
What is a bid/no-bid decision?
It’s the choice you make before writing a proposal: is this opportunity worth going after? It weighs whether you can bid, whether you can do the work and win, and what bidding would cost.
Why should small businesses evaluate opportunities before bidding?
A proposal can take days. Small teams win more when they spend that time on the few jobs they can really do and win. Answering everything wins less.
What are common reasons not to bid?
You can’t meet who can compete. The work isn’t what you do. You can’t staff it or reach the site. You lack the experience or clearances it needs. Or there isn’t time to write a strong proposal.
Can a new business win a federal contract?
Yes. Many smaller contracts are set aside for small businesses and don’t require federal experience. Read what each solicitation asks for.
What if I don’t have federal past performance?
Similar work for private or local government customers often counts. If a solicitation needs federal experience you don’t have, working under a prime is a way to build it.
How much does preparing a government proposal cost?
Mostly your team’s time. A small business often spends 20 to 60 hours on a simpler bid, and more on a large request for proposals (RFP). The free bid/no-bid tool estimates it from your hours and costs.
What happens after deciding to pursue?
List everything the solicitation requires in a compliance matrix. Assign owners, plan your price, and work back from the deadline. FedPath’s pursuit and Compliance Matrix keep it in one place.
What does Go/No-Go mean in government contracting?
It is the decision to go after an opportunity (go) or not (no-go). You make it after you look at how well it fits your business and what it would take to win.
Does the software decide whether I should bid?
No. The fit analysis suggests ratings from your profile and the notice, and you can change every one. You make the decision.
How long should a bid/no-bid review take?
For most small business opportunities, under an hour. The point is a clear decision early, and a long report isn’t needed.
Coming up
- Stopgap funding for federal agencies runs out. What it means